Products
Home / Products / 500T Crawler Crane /

Large Lifting Used 500T Crawler Crane Equipment With Good Safety

Large Lifting Used 500T Crawler Crane Equipment With Good Safety

Brand Name: SANY
Model Number: SCC6200TM-7
MOQ: One Crane
Price: 200,000-6,000,000 RMB per unit
Payment Terms: L/C,T/T
Supply Ability: Supply According to Customer Needs
Detail Information
Place of Origin:
China
Engine Power:
800 KW
Control System:
PLC
Maximum Travel Speed:
1.5 Km/h
Jib Length:
30-90 Meters
Slewing Speed:
0-2.5 Rpm
Counterweight:
200 Tons
Maximum Lifting Height:
120 Meters
Maximum Lifting Capacity:
500 Tons
Hoist Speed:
0-120 M/min
Maximum Gradeability:
30%
Operating Weight:
500 Tons
Boom Length:
15-90 Meters
Packaging Details:
Packing According to Customer Requirements
Highlight:

used 500t crawler crane

,

large 500t crawler crane

,

large hydraulic crawler crane

Product Description
Large Lifting Used 500T Crawler Crane Equipment With Good Safety
SCC6200TM-7 Crawler Crane
Max lifting moment: 6200TM
Longest main boom: 84m
Longest main boom + jib: 84m+84m
Product Specifications
Superlift Device
  • The two ends of the superlift mast arm are variable cross-section, and the middle is a space truss structure with equal cross-section
  • The steel pipes are welded, and the top and root of the arm are reinforced with steel plates for better load transmission
  • The length of the superlift mast is 30m
  • Composition: lower arm 12m×1, middle arm 6m×1, upper arm 12m×1
Hook Options
Name Max lifting weight Amount Number of pulleys Unit weight(t)
500t Hook 500t 1 2 ×9 10.80
200t Hook 200t 1 9 3.7
240t Hook 240t 1 2 ×4 4.71
160t Hook 160t 1 2 ×3 3.81
130t Hook 130t 1 5 3.06
50t Hook 50t 1 2 2.52
16t Hook 16t 1 - 0.94
Note: 500t hook can be disassembled into 250t hook, 240t hook can be disassembled into 120t hook, 160t hook can be disassembled into 80t hook. For shield working conditions, 200t single pulley block hook can be selected.
Hook Lifting Max Limit
Large Lifting Used 500T Crawler Crane Equipment With Good Safety 0
Working Weight
The working weight is about 415t, including the upper and lower parts, the main engine rear counterweight, the central counterweight, the 24m basic boom and the 500t hook.
Ground Pressure
The average ground pressure with basic arm is 0.175MPa.
Gradeability
Gradeability with basic arm is 15%.
Torque Limiter
  • The torque limiter independently developed by Sany is used to form a network with other controllers through the CAN bus to achieve safe and reliable control
  • The torque limiter can automatically detect the weight of the crane and the angle of the crane arm, and can display its rated load and actual load working radius, hook height, etc.
  • The torque limiter system consists of a large-screen color display, a host, an angle sensor, a tension sensor, and a pressure sensor
Main and Auxiliary Hook Over-Winding Prevention Device
Used to prevent the hook from over-lifting. When the lifting hook is lifted to a certain height, the limit switch is activated, the control system automatically cuts off the lifting action of the lifting hook, and the display and buzzer alarm at the same time. At this time, the lifting hook can only be lowered to prevent the over-winding of the lifting hook.
Main and Auxiliary Hook Over-Release Prevention Device
Used to prevent over-release of the hoisting wire rope. When the wire rope is released to the last three turns, the limit switch is activated, the control system automatically cuts off the rope release action, and the display and buzzer alarm at the same time. At this time, only the rope retraction operation can be performed to prevent the over-release of the lifting hook.
Installation Mode/Working Mode Switch
  • In the installation mode, some safety devices do not work (such as the lower limit of the auxiliary arm, the angle limit of the moment limiter arm, overload, etc.) to facilitate the installation of the crane
  • In the working mode, all safety devices are effective